Antaira Technologies - Industrial Ethernet Switches
LNP-2804GN-SFP-T User Manual V1.0
46
The following table describes the items in the previous figure.
Item
Description
Join Time
Enter a value to specify the time between the transmission of GARP
PDUs registering (or re-registering) membership for a VLAN or
multicast group in centiseconds. Enter a number between 6 and 600.
An instance of this timer exists for each GARP participant for each port.
Leave Time
Enter a value to specify the time to wait after receiving an unregister
request for a VLAN or multicast group before deleting the associated
entry in centiseconds. This allows time for another station to assert
registration for the same attribute in order to maintain uninterrupted
service. Enter a number between 12 and 3,000. An instance of this
timer exists for each GARP participant for each port.
Leave All Time
Enter a value to specify the Leave All Time controls how frequently
Leave All PDUs are generated. A Leave All PDU indicates that all
registrations will shortly be deregistered. Participants will need to rejoin
in order to maintain registration. The Leave All Period Timer is set to a
random value in the range of Leave All Time to 1.5*Leave All Time. The
timer is specified in centiseconds. Enter a number between 12 and
12,000. An instance of this timer exists for each GARP participant for
each port.
Apply
Click Apply to save the values and update the screen.
The ensuing table for GARP Information settings are informational only: Join Time, Leave Time
and Leave All Time.
GVRP Settings
The GVRP Settings page allows you to enable or disable the GVRP (GARP VLAN Registration
Protocol or Generic VLAN Registration Protocol) Protocol which facilitates control of virtual local
area networks (VLANs) within a larger network.
To access this page, click L2 Switching > GARP > GVRP Settings.
Figure 4.28 L2 Switching > GARP > GVRP Settings
