Antaira Technologies - Industrial Ethernet Switches
LNP-2804GN-SFP-T User Manual V1.0
56
STP Port Settings
The STP Port Settings page allows you to configure the ports for the setting, port’s contribution,
configured edge port, and set the status of the BPDU filter.
To access this page, click L2 Switching > Spanning Tree > STP Port Settings.
Figure 4.39 L2 Switching > Spanning Tree > STP Port Settings
The following table describes the items in the previous figure.
Item
Description
Port Select
Select the port list to specify the ports that apply to this setting.
Admin Enable
Select Enabled or Disabled to setup the admin profile for the STP port.
Path Cost (0 =
Auto)
Set the port’s cost contribution. For a root port, the root path cost for the
bridge. (0 means Auto).
Edge Port
Click the drop-down menu to set the edge port configuration.
No: Force to false state (as link to a bridge).
Yes: Force to true state (as link to a host).
P2P MAC
Click the drop-down menu to set the Point-to-Point port configuration.
No: Force to false state
Yes: Force to true state
Migrate
Click the check box to enable the migrate function.
Forces the port to use the new MST/RST BPDUs, requiring the switch
to test on the LAN segment for the presence of legacy devices, which
are not able to understand the new BPDU formats.
Apply
Click Apply to save the values and update the screen.
