Antaira Technologies - Industrial Ethernet Switches
LNX-1600-E Series - Hardware Manual - v1.0
5 Technical Specifications
Table 5.1 has the technical specifications for this product series.
14
Technology
Standards
IEEE 802.3 10Base-T Ethernet
IEEE 802.3 100Base-TX Fast Ethernet
Processing Type
Store and Forward
Protocol
CSMA/CD
Flow Control
IEEE 802.3x back pressure flow control
Switch Properties
Switch Architecture
Back-Plane (Switching Fabric): 3.2Gbps
Transfer Rate
14,880pps for Ethernet port
148,800pps for Fast Ethernet port
Packet Buffer
4Mbits
Jumbo Frame
1664 bytes
MAC Table Size
16K
Port Interface
Ethernet Port
16*10/100Base-T(x)
Auto-negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X
connection
LED Indicators
System: Power 1, Power 2, Fault
Ethernet Ports: On-Link/Flash-data transmitting
Network Cable
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable; EIA/TIA-568 100-ohm
(100m)
100Base-TX: 2-pair UTP/STP Cat. 5 cable; EIA/TIA-568 100-ohm (100m)
Mechanical Characteristics
Housing
Metal, IP30 protection
Dimensions
46 x 142 x 99 mm (W x H x D)
Weight
Unit: 1.38 lbs.
Shipping: 1.79 lbs.
Mounting
DIN-Rail mounting; Wall mounting
Power Requirement
Input Voltage
12~48VDC Redundant Input
