50
EN
5.3 Wheelchair hook setting
• The operations can be performed without the passenger on
board.
The stair chairs must be lowered (tracks in contact with the
floor).
• Open the wheel supports
A
.
• Move the wheelchair to the position shown, with the rear
wheels in contact with the supports A and operate the whe-
elchair brakes.
A
A
The handlebar is unlocked and can be removed
L1
Operations which must be carried out by qualified personnel or the service centre
L
The lower lever
L1
must only be used when the upper lever
L
does not work properly for some problems; during the normal
operation use only the upper lever
L
.
The wheelchair must be inspected and approved by the
technician in charge of the manufacturer of stair chairs
The unlocking levers L (upper) and L1 (lower) are con-
nected to each other by means of a flexible rope; the
movement of one lever also produces a relative movement
on the other
The handlebar includes many mechanical and electrical
devices which are very delicate. The handlebar removed
from its motorised base must be put in a safe place and
protected from accidental falls
Summary of Contents for LG2004
Page 2: ......
