64
EN
8.7 To go up stairs
• Move the tracks closer to the first step; both
the tracks must touch the step.
• Make sure that the safety belts are securely
fastened and there are not objects, clothes,
shoes and parts of hanging clothes which
may affect the stair chairs movement.
BALANCE POINT
STOP
• Check that the emergency button is released, following the
RESET instructions printed on the button itself.
• Ensure that the passenger has the seat belt fastened.
• Check that the passenger is seated correctly.
• Do not transport objects of any kind.
• Place two steps above the tracks and during movement
always keep an empty step between your shoes and tracks.
• hold the handlebar firmly to press the climb “INDIETRO”
button : the stair chairs will climb towards you linearly
and firmly.
Approach
The operator may move the stair chairs closer to the staircase
in two ways:
a) by pressing the “INDIETRO” button :
The motor causes the stair chairs to stop while holding down
the button
b) Operating it by hand after pressing the lifting button.
Near the stairs press the “INDIETRO” button to lower
the tracks to the ground.
By releasing the button the stair chairs stop
at any time.
• Continue to climb until you reach the landing.
• Stop the gear so that the balance point matches as much
as possible with the step edge.
BALANCE POINT
BALANCE POINT
It refers to the point where masses
are balanced.
ASCENDING CYCLE (S1.......S5)
S1
Tracks are in con-
tact with the first
step
S2
The stair chairs are
in climb phase
S3
The stair chairs are
stopped on the ba-
lance point
Ensure that there are not people or animals down the path
on stairs and there are not free children who may acciden-
tally interfere with the stair chairs movement
Summary of Contents for LG2004
Page 2: ......
