background image

27

 

 

they have been specifically instructed on the chair’s use. 

•  The operators and those being transported must not smoke 

in  order to  prevent damage or  risk of fire with respect to 
clothes, upholstery or other people. 

 

•  Those  operating the  wheelchair must  always keep  both 

hands on the handlebar to ensure constant control. 

•  Assembly and adjustment operations must only be carried 

out by authorised personnel. 

•  Never lift up the wheelchair when there is a passenger in it. 

 

 

•  The device cannot be used in  areas subject to splashing 

water or critical and unfavourable weather conditions 

 

•  The operator and the passenger must be careful not to wear 

long scarves or loose clothing; these may get caught in the 
device and cause dangerous situations. 

 

• 

OPERATOR

 

The device should only be handled on stairs by those who 
have been specifically trained: 

 

Operator qualified for handling on stairs

 

To handle the device on stairs, both going up and down, the 
operator must possess a certificate of qualification issued 
by the manufacturer or an authorised representative, only 
after having received direct theoretical and practical training 
and only after demonstrating the ability to safely perform all 
the operations described in this manual. 
To ascend or descend the stairs, the security key must be 
inserted; without this key the device does not accept these 
specific commands 

 

•  Transfer of the aid 

In case the person who handles the device is replaced or 
in case of shift rotation, ensure that all those handling the 
device have been qualified by the manufacturer or an au- 
thorised representative; unqualified people are not allowed 
to handle the device. 

•   Never approach a staircase if the passenger is not in a fully 

upright  position,  or  the  position  of  movement (see  USE 
chapter). 
If the passenger is not able to sit in an upright and stable 
position, use specific seat belts to secure the passenger to 
the backrest. 

•  Before ascending or descending the staircase, verify the 

characteristics of the stairs: 
- they must not be covered by rugs or fitted carpeting 
- they must not be unstable or unfinished, but compact 
-  they  must  not  have  irregular, broken or  collapsed edges 
- they must not be wet or slippery. 

 

•  Spiral staircases

 

The device can be handled on closed spiral staircases (with 
riser) only if  the size and characteristics of the stairs are 
compatible with that described in Chapter 7. 

 

•       Stair climber operating key

 

 

The stair climber can only be operated if the 

key  is  inserted; this  protects the  device and  people from 
reckless use by unqualified personnel. 

 

•  Warning! Before starting to go down the stairs, tilt the aid 

back until both step edge detector wheels are engaged. 
These automatically activate the wheel brakes, stopping 
the aid on reaching the first step to start the descent. 
If this is not done, the aid will not come to a halt and there 
will be a high risk of falling down the stairs. 

 

 
 
 

2.2   Pictograms

 

The following pictograms may be present on the wheelchair or in this manual. 

 

Read the instructions manual

 

Warning, danger

 

 

Operations which must be carried out by qualified per-

 

sonnel or the service centre

 

 

Risk of crushing fingers in the mechanical transmission

 

 

Attention! Important information

 

Electrical hazard

 

 

 

Information

 

Use of protective gloves

 

 

 

Operations to be carried out by two people

 

Only wear closed shoes

 

 

 

Compulsory use of the seat belts

 

 

Do not wear shoes with heels or slippers

 

 

 

 

The manufacturer reserves the right to changes to the product and its instructions manual without prior notice or updating of 
previous productions.

 

The manufacturer is not liable for damage resulting from improper use of the wheelchair by untrained or unauthorised personnel, 
unauthorised modifications and interventions, the use of unauthorised parts, exceptional events, or total or partial failure to comply 
with the instructions in this manual.

 

Summary of Contents for LG2020


























Reviews: