10
© 2019 Antari Lighting and Effects Ltd.
www.antari.com
DMX
Connector Pin Assignment & instruction
3-1
The machine provide 3 or 5 pin XLR connector for DMX connection.
Diagram below indicate pin assignment information.
Pin
Function
1
Grounding
2
Data -
3
Data +
3-2
DNG-250 DMX instruction
DNG-250 low fog generator has built-in DMX 512 function with 3 Pin and 5 Pin
sockets to choose from. After connecting to DMX, TFT touch panel can’t be used,
and all actions are controlled by DMX. Only DMX address can be entered with
TFT touch panel.
3-3
DMX 512 settings
Function
Figures
Meaning
Output Volume
0 - 4
Off
5 - 255
1 - 100%
4-1
RDM (
Remote Device Management)
Function
DNG-250 is equipped with RDM function which allows users to control the unit
through devices with RDM ANSI E1.20 protocol. This is a protocol enhancement
that allows bi-directional communication between a controller and attached RDM
compliant devices over a standard DMX line. Users may set, monitor and
manage the RDM supported devices and equipment in DMX network.
RDM Function