![background image](http://html1.mh-extra.com/html/antari/mobile-mb-20/mobile-mb-20_user-manual_2946919011.webp)
11
© 2020 Antari Lighting and Effects Ltd.
www.antari.com
Registering a transmitter
Transmitters can be paired or deleted from the receiver. Each receiver can pair up to 5
transmitters. Follow the steps below to pair or delete a transmitter from a receiver.
To Pair
Step 1: Put Dip switch 11 to ON position
Step 2: LED indicator will start blinking, press and hold [A] to pair
Step 3: Once pairing complete LED indicator will be constant on for 3 seconds
Step 4: Put Dip switch 11 back to OFF position to start operation.
To Delete
Step 1: Put the dip switch 10 to ON position
Step 2: LED indicator will start blinking, press and hold [A] to delete
Step 3: The deleting process will take approximately 10 seconds
Step 4: Once deleted, the LED indicator will be on for 3 seconds
Step 5: Put the dip switch 10 back to the OFF position to start operation
Transmitter battery replacement
If the effective distance seems to decrease, it is possible the battery level is low and
requires replacement. In order to replace the battery, undo the three screws on the back of
transmitter to release the cover. Replace with the same type and specification of battery
which is 27A 12V