LIVING BY THE SUN!
MANUAL
I
9
Nameplate: describes the product model; rated power; rated current, rated voltage, open circuit voltage, and short circuit
current. All above parameters are measured in standard test conditions. Other information, such as weight, size, maximum
system voltage and maximum fuse current are marked on the nameplate as well. Barcode: the barcode is in the internal of
the Modules, which containing the relevant retrospect information of the Modules.
!
Please do not remove any label, or ANTARIS SOLAR will not provide any warranty.
1. Do not touch the live part of the wire cable and the connector. When touching, use the safety equipment
(insulating tool, insulating gloves etc).
2. When maintaining the Modules, use opaque cloth or other materials to cover the frontage of the Modules.
Exposed in sunlight, the Photovoltaic Modules may produce high voltage, which is a potential danger.
3. Cleaning instruction
Periodic cleaning is necessary for solar module, which could reduce the loss due to dust and is recommended
by ANTARIS SOLAR. The cleaning processes should be accomplished by the professionals with appropriate
qualifications. When cleaning the module surface,
a) Rules shown as below must be followed:
• Only at low irradiance, the cleaning process could be applied.
• Only soft cloth or sponge could be used to clean the glass surface.
• Only clean water could be used as the cleaning solvent.
• The discrepancy between water temperature and module temperature should be in the range of -5°C to +10°C.
• Water pressure should be less than 1000 Pa.
• Necessary electrical protection should be taken.
b) Following notes should be taken into account:
• No other chemical could be used in cleaning process.
• No aggressive tool or coarse material is permitted.
• Do not trample or strike on modules.
• In cleaning process, the modules must not be under a load circumstance.
• Do not touch exposed cables or connectors.
• Forbidden to remove dust in dry way.
• Forbidden to clean modules before cooling down.
Product identification
Maintenance
