Antec VP350 User Manual Download

Page: 5 / 6

Connect the AC power cord to the power supply AC inlet. Be sure to use the heavy-duty cord supplied

with your PSU.

Hard drives, optical drives (CD/DVD/BluRay™) and other accessories will use either the older 4-pin

Molex connector or the newer 15-pin SATA connector. 4-pin Molex connectors have two black, one

yellow and one red wire. The SATA connector has an additional orange power wire.

When you have all the connections secured, turn the switch on the PSU to the “|” position.

Summary of Contents for VP350

Page 1: ...1 VP350 POWER SUPPLY USER S MANUAL ...

Page 3: ... 5 120 mV 12V 18A 5 120 mV 3 3V 20A 5 50 mV 5V 18A 5 50 mV 12V 0 3A 10 200 mV 5Vsb 2A 5 50 mV TABLE 2 Cable Quantity Connectors Description 1 X 1 24 20 4 pin Motherboard 1 X 1 8 4 4 pin ATX12V EPS12V 1 X 1 6 pin PCI E 1 X 1 SATA X 2 Molex X 1 FDD 1 X 1 Molex X 2 SATA ...

Page 4: ...r supply should be installed Connect the 24 pin main power connector to your motherboard Connect the 8 pin or 4 4 pin connector for the CPU If your motherboard has an 8 pin socket with a cover on some of the openings we recommend that you remove the cover and use the 8 pin connector Note Please also refer to your motherboards manual for any special instructions ...

Page 5: ...al drives CD DVD BluRay and other accessories will use either the older 4 pin Molex connector or the newer 15 pin SATA connector 4 pin Molex connectors have two black one yellow and one red wire The SATA connector has an additional orange power wire When you have all the connections secured turn the switch on the PSU to the position ...