Antec VP450F User Manual Download

Page: 5 / 7

INSTALLATION

Install the PSU into either the top or bottom of your case with the four screws provided. Refer to your

case manual if you are unsure where the power supply should be installed.

Connect the 24-pin main power connector to your motherboard.

Connect the 8-pin or 4+4-pin connector for the CPU. If your motherboard has an 8-pin socket with a

cover on some of the openings, we recommend that you remove the cover and use the 8-pin

connector.

Note: Please also refer to your motherboards manual for any special instructions.

Summary of Contents for VP450F

Page 1: ...1 VP450F POWER SUPPLY USER S MANUAL ...

Page 4: ...4 TABLE 2 Cable Quantity Connectors Description 1 X 1 24 20 4 pin Motherboard 1 X 1 8 4 4 pin ATX12V EPS12V 1 X 1 6 pin PCI E 1 X 1 SATA X 2 Molex X 1 FDD 1 X 3 SATA X 1 Molex ...

Page 5: ...r supply should be installed Connect the 24 pin main power connector to your motherboard Connect the 8 pin or 4 4 pin connector for the CPU If your motherboard has an 8 pin socket with a cover on some of the openings we recommend that you remove the cover and use the 8 pin connector Note Please also refer to your motherboards manual for any special instructions ...

Page 6: ...al drives CD DVD BluRay and other accessories will use either the older 4 pin Molex connector or the newer 15 pin SATA connector 4 pin Molex connectors have two black one yellow and one red wire The SATA connector has an additional orange power wire When you have all the connections secured turn the switch on the PSU to the position ...