Antec VP550F User Manual Download

Page: 6 / 7

Connect the AC power cord to the power supply AC inlet. Be sure to use the heavy-duty cord supplied

with your PSU.

PCI-E graphics cards use different amounts of power. For some, a single 6-pin connector is sufficient,

making the hardwired connector the preferred choice. More powerful cards use multiple connectors,

including the advanced 8-pin PCI-E connector. The 8-pin PCI-E connector on the PSU can be used as

either a 6- or 8-pin connector.

Hard drives, optical drives (CD/DVD/BluRay™) and other accessories will use either the older 4-pin

Molex connector or the newer 15-pin SATA connector. 4-pin Molex connectors have two black, one

yellow and one red wire. The SATA connector has an additional orange power wire.

When you have all the connections secured, turn the switch on the PSU to the “|” position.

Summary of Contents for VP550F

Page 1: ...1 VP550F POWER SUPPLY USER S MANUAL ...

Page 4: ...4 TABLE 2 Cable Quantity Connectors Description 1 X 1 24 20 4 pin Motherboard 1 X 1 8 4 4 pin ATX12V EPS12V 1 X 2 8 6 2 pin PCI E 1 X 3 Molex X 1 FDD 1 X 2 SATA X 1 Molex 1 X 3 SATA ...

Page 5: ...r supply should be installed Connect the 24 pin main power connector to your motherboard Connect the 8 pin or 4 4 pin connector for the CPU If your motherboard has an 8 pin socket with a cover on some of the openings we recommend that you remove the cover and use the 8 pin connector Note Please also refer to your motherboards manual for any special instructions ...