L-501 Models
17
Anthony Lifgtates, Inc.
800-482-0003
www.anthonyliftgates.com
19. Bolt the four rubber bumpers to the corners of the
deck using 5/16-18 x 1” bolts.
20. Open the hood and disconnect the truck’s battery.
Uncoil the power cable and place it away from all
moving parts. Refer to the wiring diagram on page
20.
21. Install the 200 Amp fuse assembly within 30” of
the truck battery, and in a location that is easily
accessible for fuse replacement. Leave enough
slack in the cable to connect it to the positive (+)
post of the battery.
22. Secure the fuse assembly to a solid surface with
wire ties or other suitable fasteners, leaving a
minimum of 6” of slack in the cable for changing the
fuse.
23. Route the supplied power cable (with attached fuse
assembly) along the underside of the truck frame,
to the liftgate power supply using only one of these
three methods. Secure it at 18” intervals using the
supplied cable ties.
DANGER
Never secure the power cable to anything
which allows it to come into contact with sharp
edges, other wiring, fuel tank, fuel lines, brake
lines, air lines, exhaust system, or any other object
that could cause the power cable to wear or become
damaged. A direct short in the battery cable can
result in loss of vehicle control, serious injury, or
even death.
Summary of Contents for ALB-1500
