Anthony Liftgates ALB-1500, Installation, Operation, And Parts Manual

L-501 Models 

7 

Anthony Lifgtates, Inc. 

800-482-0003  

www.anthonyliftgates.com

2.  

Safety Section

2.1  Safety is Your Responsibility

It is the responsibility of the installer/operator to 
understand and perform proper operating 
procedures.  Be aware of the inherent dangers in 

the use of this product and the tools used to install it.  
Read and understand all Danger, Warnings, Cautions, 
and Important Notices in this manual and on the liftgate 
or truck.

2.2  Safety Signal Words

This is the safety alert symbol. It is used to alert 
you to potential personal injury hazards. Obey all 
safety messages that follow this symbol to avoid 

possible injury or death.

This manual contains DANGERS, SAFETY 
INSTRUCTIONS, CAUTIONS, IMPORTANT NOTICES, 
and NOTES which must be followed to prevent the 
possibility of improper service, damage to the equipment, 
personal injury, or death. The following key words call the 
readers’ attention to potential hazards.

Hazards are identifi ed by the “Safety Alert Symbol” 
and followed by a signal word such as “DANGER”, 
“WARNING”, or “CAUTION”. 

DANGER

Indicates an imminently hazardous situation which, if 
not avoided, will result in death or serious injury.  This 
signal word is limited to the most extreme situations.

WARNING

Indicates a potentially hazardous situation which, if 
not avoided, could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation which, if 
not avoided, may result in minor or moderate injury. 

NOTICE

Indicates that equipment or property damage can result if 
instructions are not followed.

SAFETY
INSTRUCTIONS

Safety instructions (or equivalent) signs indicate 
specific safety-related instructions or procedures.

Note

:  Contains additional information important to a 

procedure.

2.3 Safety 

Rules

Accidents can often be avoided by being alert and 
recognizing potentially hazardous situations.  Any 
individuals installing, operating, repairing, or maintaining 
products manufactured by Anthony Liftgates should 
have the necessary training, skills, and tools required to 
perform these functions properly and safely.  The safety 
information in this manual serves as a basic guide in an 
attempt to prevent injury or death.

Anthony Liftgates cannot anticipate every possible 
circumstance that might involve a potential hazard.  The 
warnings in this manual and on the product itself are, 
therefore, not all-inclusive.  If tools, procedures, work 
methods, or operating techniques that are not specifi cally 
mentioned by Anthony Liftgates are used, you must 
satisfy yourself that they are safe for you and for others.  
Make sure the liftgate or truck it is mounted onto will 
not be damaged or made unsafe by any operation, 
lubrication, maintenance, or repair procedures that you 
choose.

DO NOT proceed, if any doubt arises about the correct or 
safe method of performing anything found in this or other 
Anthony Liftgates’ manuals.  Seek out expert assistance 
from a qualifi ed person before continuing.

WARNING

To avoid personal injury or death, carefully 
read and understand all instructions pertaining 
to the Anthony Liftgates product.  Do not 

attempt to install, operate, or maintain our product 
without fully understanding all of our instructions and 
safety recommendations.  Do not operate or work on 
a truck or liftgate unless you read and understand the 
instructions and warnings in the Installation and 
Operation manual.  If any doubt or question arises 
about the correct or safe method of performing 
anything found in this or other Anthony Liftgates’ 
manuals, contact your Anthony Liftgates’ dealer or 
call the Inside Sales and Service representatives at 
our main headquarters.  Proper care is your 
responsibility.