27
www.antiktech.com
Your digital visual world!
Open the IE browser and type ftp://10.10.70.48 in the address bar and press
Enter
. If the network
configuration is correct, you can open the FTP folder without any error, as shown below.
Figure 2: Open the FTP folder
Enter the “ftp://10.10.70.48/pub” folder, then copy the “target.tgz” file in this folder, as shown below.
Figure 3: Copy “target.tgz” File
Open MS-DOS window by typing
Start
on the lower left quarter of Windows OS. Select
Run
and
key in “cmd” in dialog and press
Enter
. Type the command “telnet 10.10.70.48”; the current IP
address of the equipment under software upgrade as follows:
