background image

Battery Legal 

1. When charging, please put this product on a dried or ventilated area and keep it far away from heat sources 

or explosive products.

2. Do not charge the battery if ModMic Wireless is hot to the touch. Otherwise it may damage the battery and  

could be a fire hazard. 

3. Please make sure that you use the original USB charging cable provided. If the battery appears swollen or 

gets hot during charging please stop charging and contact CustomerService@AntlionAudio.com.

4. A battery when not in use for a long time will lose its charge automatically. Charging or discharging too 

often may reduce the life of the battery.

ModMic Wireless

Warranty 

Warranty 

FROM DATE OF PURCHASE, OUR ONE (1) YEAR LIMITED WARRANTY COVERS MANUFACTURING DEFECTS OF THE MODMIC AND/OR ITS ACCESSORIES.  

If you experience a product defect and are within the return period of the reseller from which you purchased, please return the item to the retailer. 
If you are outside their return window but within our warranty window of 1 year (or the minimum warranty required by your country from date of 
purchase), we will repair or replace your ModMic for any manufacturing defects in the ModMic and/or its accessories at our discretion.

Our Warranty does not cover/is voided by the following:
1. Damage caused by accident, abuse, neglect, or misuse.
2. If you cannot supply a valid dated proof of purchase.
3. If the ModMic or USB Reciever has been disassembled.

Before returning your ModMic for repair or replacement please contact us first at CustomerService@AntlionAudio.com for further assistance!

After Warranty repair or replacement, your Warranty will remain in effect until either one (1) year after your original purchase date, or ninety (90) 
days after repair or replacement, whichever is longer.

Summary of Contents for ModMic Wireless








Reviews: