HEBT-3V BUN TOASTER
12
P/N 1011314 Rev. D 05/16
McDonald’s
MAINTENANCE (continued)
Figure 12. Accessing Top Cooling Fan
Cleaning the Top Cooling Fan and
Electrical Housing (Annually)
Follow these steps to clean the top fan.
1. Turn the power switch to the OFF position. The
toaster enters a cool-down mode and will auto-
matically shut down when complete. Unplug the
power cord.
2. Facing the front of the toaster, move to the right
Side Panel. Remove the 2 top screws from the
right Side side Panel and lower the panel (Figure
12).
3. Use a plastic brush or similar tool to brush all 5
fan blades from beneath. Be sure to remove all
debris.
4. Carefully clean any debris from the inside floor
of the control compartment and from all electrical
connections. Be sure to remove any grease, lint,
or debris from these areas.
5. Attach the right Side Panel and secure with
screws.
Cleaning the Rear Cooling Fan and
Electrical Housing (Annually)
Follow these steps to clean the rear fan.
1. With the unit off, remove the 3 rear screws secur-
ing the rear access panel and carefully lower the
panel (Figure 13).
2. Use a plastic brush or similar tool to brush all 5
fan blades free of debris.
3. Carefully clean any debris from the floor of the
toaster and from all electrical connections. Be
sure to remove any grease, lint, or debris from
these areas.
4. Attach the rear panel and secure with the 3
screws.
NOTE: Be careful not to pinch wiring upon closing
the rear panel.
5. Plug in the power cord, turn the power switch on,
and test the toaster for proper operation.
Figure 13. Accessing Rear Cooling Fan
