VERTICAL CONTACT TOASTER
19
P/N 1010838 Rev. P 10/16
Burger King
Problem
Possible Cause
Corrective Action
Toaster makes unusu-
al sounds.
Compression Settings are too tight.
Set Compression Settings to the correct (or larger)
setting.
Conveyor Belt Wrap is installed
incorrectly.
Belt Wraps must be installed as described in the
Maintenance section of this manual.
Belt Wrap Pin rubbing on housing.
Center the Pin in the Belt Wrap “Zipper.”
Roller Tensioner(s) bent or missing.
Measure, adjust, or replace the Roller Tensioner(s)
as described in the Maintenance section of this
manual.
Conveyor Belt Chains have
stretched.
Measure and adjust the conveyor Belt Chains as
described in the Maintenance section of this
manual.
Conveyor Belt Chains adjusted
incorrectly.
Sugar and/or Carbon has accumu-
lated inside the Conveyor Belt Wrap
and between the Conveyor Belt
chain and Tensioner Slide Rails.
Remove Belt Wraps, Clean conveyor Belt Chain
links just as you clean the Belt Wraps daily, and
then clean the Slide Rails on the Tensioners. Next,
clean the Belt Wrap on both sides before reinstall-
ing it.
Motor Drive Chain needs lubrication. Lubricate the Drive Chain carefully at least once a
year.
A Conveyor Shaft bearing is binding
or worn.
Contact your maintenance person or Authorized
Service Agency for service.
TROUBLESHOOTING (continued)