background image

Limited Warranty

Equipment manufactured by Antunes has been constructed of the finest materials available and manufactured to high quality 

standards.  These units are warranted to be free from defects in materials and workmanship for a period of one year from date of 

purchase under normal use and service, and when installed in accordance with manufacturer’s recommendations*. 
*To ensure continued proper operation of the units, follow the maintenance procedure outlined in the Owner’s Manual.

1. 

This warranty does not cover failures due to improper system installation, defects caused by improper storage or handling prior 

to placing of the equipment into service.  This warranty does not include overtime charges or work done by unauthorized service 

agencies or personnel.  This warranty does not cover normal maintenance, calibration, or regular adjustments as specified in 

operating and maintenance instructions of this manual, and/or labor involved in moving adjacent objects to gain access to the 

Equipment.  

2. 

Antunes reserves the right to make changes in design or add any improvements on any product.  The right is always reserved 

to modify equipment because of factors beyond our control and government regulations.  Changes to update equipment do not 

constitute a warranty charge.

3.  If shipment is damaged in transit, the purchaser should make a claim directly upon the carrier.  Careful inspection should be 

made of the shipment as soon as it arrives and visible damage should be noted upon the carrier’s documentation.  Damage 

should be reported to the carrier.  This damage is not covered under this warranty.

4. 

THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, 

INCLUDING ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, EACH 

OF WHICH IS HEREBY EXPRESSLY DISCLAIMED.  THE REMEDIES DESCRIBED ABOVE ARE EXCLUSIVE AND IN 

NO EVENT SHALL ANTUNES BE LIABLE FOR SPECIAL CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR THE 

BREACH OR DELAY IN PERFORMANCE OF THIS WARRANTY.

Prices and specifications are subject to change without notice.

Summary of Contents for 9710141























Reviews: