9
P/N 1012011 Rev. C 06/18
Annual Cleaning
Clean Cooling Fans and
Electrical Housings
1. Turn the toaster’s power switch
to the off position. The toaster
enters a cool-down mode and
will automatically shut down
when complete. Unplug the
power cord.
2. Remove the push knob and top
six screws on the left side of the
toaster and set aside.
Using the handle, remove the left
side cover of the unit by lifting up
and away from the unit. Set aside.
Figure 7.
Accessing the cooling fan
3. Remove any debris or dust from
the cooling fan with a small
brush. Wipe away any debris
with a clean, dry towel Inspect
the electrical compartment for
crumbs and debris. Clean out
all crumbs and debris using a
clean, dry towel or nylon bristled
brush. Be careful not to disrupt
any of the electrical wiring.
4. Replace the left side panel
cover by sliding it onto the bot-
tom screws.
5. Reconnect with the screws and
replace Push on Knob.
