background image

MUFFIN TOASTER MT-12

2

P/N 1010918 11/05

General

The Muffin Toaster Model MT-12 is designed to toast 6 

full English muffins (12 halves) at one time.  A tempera-

ture sensing solid state control measures the internal 

temperature of the toaster and adjusts the toasting time 

automatically to toast muffins faster during heavier use.  

The toaster signals the operator with an audible beep 

and a ready light when muffins are ready.
The toaster is capable of producing up to 324 muffins 

per hour.  6 muffin halves or less is a partial load and 7 

- 12 muffin halves is a full load.
To conserve energy, when the toasting chamber is 

empty, the toaster idles at 600 watts.  This represents a 

75% reduction in operational power consumption.
This manual provides the safety, installation, and oper-

ating procedures for the unit.  We recommend that all 

information contained in this manual be read prior to 

installation and operation. 
This unit is manufactured from the finest materials 

available and is assembled to Roundup’s strict quality 

standards.  It has been tested at the factory to ensure 

dependable trouble-free operation. 

OWNER INFORMATION

TABLE OF CONTENTS

IMPORTANT!  Keep these instructions for future reference.  If the unit changes ownership, 

 be sure this manual accompanies the equipment.

Warranty Information

Please read the full text of the Limited Warranty in this 

manual.
If the unit arrives damaged, contact the carrier imme-

diately and file a damage claim with them.  Save all 

packing materials when filing a claim.  Freight damage 

claims are the responsibility of the purchaser and 

are 

not

 covered under warranty.

The warranty 

does not extend to:

•  Damages caused in shipment or damage as  

result of improper use.

•  Installation of electrical service.
•  Normal maintenance as outlined in this manual.
•  Malfunction resulting from improper maintenance.
•  Damage caused by abuse or careless handling.
•  Damage from moisture into electrical components 
•  Damage from tampering with, removal of, or  

changing any preset control or safety device.

IMPORTANT

A.J. Antunes & Co. reserves the right to change specifications and product design without 

notice.  Such revisions do not entitle the buyer to corresponding changes, improvements, addi-

tions or replacements for previously purchased equipment.

Owner Information .....................................................2

General ......................................................................2

Warranty Information .................................................2

Service/Technical Assistance ....................................3

Important Safety Information ....................................3

Specifications .............................................................5

Electrical Ratings .......................................................5

Electrical Cord & Plug Configurations .......................5

Model Designation .....................................................5

Dimensions ................................................................5

Installation ...................................................................6

Unpacking ..................................................................6

Location .....................................................................6

Operation .....................................................................6

Operating Instructions ...............................................6

Hi-Limit Reset Button ................................................7

Maintenance ................................................................7

Maintenance Schedule ..............................................7

Function of Diagnostic LEDs .....................................8

Troubleshooting .........................................................9

Replacement Parts ...................................................12

Wiring Diagrams .......................................................15

Limited Warranty ......................................Back Cover

Summary of Contents for Roundup MT-12

















Reviews: