© 2022 ANTZER TECH CO., LTD.
10
Device ID
You can set up the ID of the RIFAs from 00000~99999, it can help you to track the
device by ID and show IDs in your backend server.
GPS Control
(1)
Geofence: Set “On” to execute Geofence function
(2)
Get Exist Geofence Data: Check now the geofence region (coordinates) which is
setting.
(3)
Configure Geofence Data: Set up a new geofence region (coordinates).
(4)
Apply: Click this button to save all the “GPS control” settings.
Virtual Odometer
You can set up the initial value of virtual odometer by input value (unit=100
meters)
and apply the setting.
Set Server ACK
By this function, you can set server ack mechanism to RIFA (data check). But if your
server doesn’t send ack checking to client or node device , please set “0 – ACK is not
required” to RIFA for avoiding data traffic jam.
WWAN Transmit Control
(1)
Period: Type the period value (seconds) you want to send data via cellular
network. (System will show the network type such as 3G , 4G or NBIoT)
(2)
Transmission: Set “On” to request WWAN module to send data by defined time
interval.
(3)
Apply: Click this button to save all the “WWAN Transmit control” settings.
Set OBDII Protocol
Set baud rate which is corresponding to your vehicle ECU or you can set “Auto
