© 2022 ANTZER TECH CO., LTD.
11
search” if you don’t know what the baud rate is, but it may take a longer time for
detecting the correct baud rate.
BLE Setting (optional)
Set on/off to trigger BLE function to RIFA .With this function, you can check RIFA’s
collected temperature data through ELSA sensor.
WWAN configuration
(1)
IP Addr/Remote Port/Local Port : Type the IP address, remote port and local
port(if needed) of your server uploading by RIFA
(2)
APN/ID/PWD: Type the APN,PIN,ID and password provided by your WWAN
SIM card carrier
(3)
TCP/UDP: Select the data transmission protocol by RIFA’s data uploading
(4)
SMS phone No.: Type the phone number used which you want to remotely
configure (dial into) RIFA by SMS
(5)
Authentication: Select the authentication type by data transmission
(6)
WWAN: Set “On” to wake up WWAN module
(7)
Apply: Click this button to save all the “WWAN configuration” settings.
SIM Card PIN
Set SIM card pin number to RIFA which need to be corresponding to the
telecom carrier’s setting
Enter sleep mode after idling
You can set the power saving mode with idling time , it can help RIFA enter to
power saving mode to save the power of vehicle power. Note: RIFA is auto-
configured to wake up by vibration or receiving data.
Buzzer Setting (optional)
You can trigger RIFA’s internal buzzer by setting “on”. Buzzer is designing for
GPS starting and the waring of geofencing.