38
Click the button [Terminal Parameter]. The [Terminal parameter settings] interface
pops up:
Sleep time (0~250minutes): How long dose the terminal turn to the sleep mode if
there is no one operating the terminal.
Volume (0~5): The volume of the prompt sound in the terminal. The default value is
3.
Date format: There are three kinds date format: yy-mm-dd, mm/dd/yy, dd/mm/yy.
Time format: There are two kinds time format: 24 hour and 12 hour.
Record Alarm Threshold Values: If the rest memory space for the record is less
than the threshold value, the machine will alarm.
Time period between repeated Clocking (0~250minutes): The maximum value is
250s. And the default value is 5s.
Workcode prompt: The workcode indicates what kind of work that the employee
takes. If you enable this function, the terminal asks for the workcode after one get pass
from the terminal.
Click the button [OK] to confirm.
Realtime monitor function: Realtime monitor function is only for the TCP\IP
Card Verify
ID 008101
Workcode
000000