◆
Programming Output #2:
NOTE: For all of the following programming functions, the keypad must be in Programming Mode.
To enter Programming Mode, enter the Master Code twice.
Programming an output #2 User Code
1. Enter * 4
2. Enter a user ID number ( 0 0 to 0 9 )
3. if the LED is red, previous user data exists. Clear it by entering * *. The keypad will beep in confirmation
and the LED will turn green.
4. Enter a new user code.
5. To program the next user, repeat from step 2.
6. Return to Programming Mode by pressing #.
7. Exit Programming Mode by pressing # again.
◆
Deleting or Changing Users:
Deleting or Changing an Output #1 User:
Step 1 Enter a user ID number: 0 0 0 to 9 9 9
Step 2 Delete existing user by entering: * *
Step 3 Enter a new user code x x x x or
Return to Programming Mode by entering #
Deleting or Changing an Output #2 User:
Step 1 Enter: * 4
Step 2 Enter a user ID number: 0 0 to 0 9
Step 3 Delete existing user by entering: * *
Step 4 Enter a new user code x x x x or
Return to Programming Mode by entering #
◆
Additional Programming:
Programming the Output# 1 Timer
DEFAULT: 1 second
Step 1 Enter: *1
Step 2 For toggle mode, enter 0 0 or for timed output, enter 01 to 99
01 to 99 is the number of seconds Output #1 will activate
Programming the Output# 2 Timer
DEFAULT: 1 second
Step 1 Enter: *5
Step 2 For toggle mode, enter 0 0 or for timed output, enter 01 to 99
01 to 99 is the number of seconds Output #2 will activate
Copyright © All rights reserved. P-MU-DG-750 Published 2019.07.01
