Anybus Communicator - PROFINET IRT (2.32) Interface
Installation Guide
www.anybus.com
SP2193 1.01 Dec 2016
Front View
Bottom View
1
4
1
2
1
5
6
9
PC Connector
1. GND
2. GND
3. RS232
Rx
4. RS232
Tx
Subnetwork Connector
1. +5V
OUT
2. RS-232
Rx
3. RS-232
Tx
4. NC
5. Signal
GND
6. RS-422
Rx+
7. RS-422
Rx-
8. RS-485+/RS-422
Tx+
9. RS-485-/RS-422
Tx-
Power Connector
1.
+24 V DC
2. GND
Accessories Checklist
The following items are required for installation:
• Anybus
Con
fi
guration Manager - Communicator RS-232/422/485
(available at
www.anybus.com
)
• RS-232
con
fi
guration cable
• Subnetwork
connector
•
PROFINET network cable and connector (not included)
Installation and Startup Summary
1.
Mount the gateway on the DIN rail
2.
Connect the gateway to the PROFINET network
3.
Connect the gateway to the subnetwork
4.
Power on the gateway
5.
Connect the con
fi
guration cable between the gateway and
the PC containing Anybus Con
fi
guration Manager
6. Con
fi
gure the gateway using Anybus Con
fi
guration Manager
7. Con
fi
gure and start the PROFINET network
LED Indicators
LED
Indication
Meaning
1 (Network Status)
Off
Of
fl
ine
- No power
- No connection with IO Controller
Green
Online (RUN)
- Connection with IO Controller established
Green, 1
fl
ash
Online (STOP)
- Connection with IO Controller established
- IO Controller in STOP state or IO data bad
- RT synchronization not
fi
nished
Green, blinking
Node identi
fi
cation (see manual)
Red
Fatal error
Red, 1
fl
ash
Station name error
Red, 2
fl
ashes
IP address error
Red, 3
fl
ashes
Con
fi
guration error
Alternating Red/Green
Firmware update in progress
2 (Module Status)
Off
No power or initializing
Green
Normal operation
Green, 1
fl
ash
Diagnostic event present
Red
Fatal error
Alternating Red/Green
Firmware update in progress
3/4 (Link Activity)
Green
Link OK
Green,
fl
ickering
Transmitting/receiving data
Off
Link not detected or no power
5 (Subnet Status)
Green,
fl
ashing
Running, one or more transaction errors
Green
Running
Red
Transaction error/timeout or subnet stopped
6 (Device Status)
Off
No power
Green
Initializing
Green,
fl
ashing
Running
Red
Bootloader mode
Alternating red/green
Con
fi
guration error
1
3
5
2
4
6
Network Status
Device Status
Subnet Status
LAN Port 1
LED Indicators
Link Activity 1
Module Status
Link Activity 2
LAN Port 2
LAN Connector (RJ-45)
1. TD+
2. TD-
3. RD+
4. (reserved)
5. (reserved)
6. RD-
7. (reserved)
8. (reserved)
1
8
