Thank you for choosing ANYCUBIC products.
Please read this manual carefully. The installation techniques and precautions in this manual can help you
avoid any unnecessary damage or frustration.
More information please refer to :
1. http://www.anycubic.com/
ANYCUBIC website provides software, videos, models, after-sale service, etc.
Please visit our website for technical support and we are likely to answer or solve all the questions for you!
2. Facebook page and Youtube channel as shown below.
ANYCUBIC Website
Facebook page
Youtube channel
Safety instruction
Alwaysfollowthesafetyinstructionsduringassemblyandusage,toavoidanyunnecessary
damagetothemachineorindividualinjury.
Please contact our customer service first if you have any issue after receiving the products.
The washing liquid should be sealed and stored in a cool and dry place after use. If the liquid is
alcohol, please strictly follow the instructions of alcohol.
In the curing mode, do not take off the cover of the machine to prevent potential hazard of UV light.
Do not clean the models directly without putting them in cleaning basket or suspending them on the
platform. After cleaning, the models need air-dried before putting in the curing chamber.
Be cautious when using the scraper. Never direct the scraper towards your hands.
In case of emergency, please immediately cut off the power of ANYCUBIC machine and contact the
technical support.
ANYCUBIC machine includes moving parts that can cause injury.
Keep the ANYCUBIC machine and its accessories out of reach from children at all times.
ANYCUBIC machine must not be exposed to water or rain.
ANYCUBIC machine is designed to be used within ambient temperature ranging 0ºC-40ºC, and
humidity ranging 20%-50%. Working outside those limits may result in low quality performance.
Do not disassemble ANYCUBIC machine, please contact technical support if you have any question.
Copyrighted by “Shenzhen Anycubic Technology Co., Ltd”, all rights reserved.
