www.anycubic.com
22
Leveling
Leveling the printing platform is a key step in 3D printing, which
determines to a large extent whether the model can be reliably adhered
to the printing platform. If the distance between the nozzle and the
printing platform is too wide, the model will not adhere to the printing
platform properly. If the nozzle is too close to the printing platform, it will
hinder material extrusion and scratch the platform. Once leveled, it is not
necessary to level every time before each printing.
Vyper supports auto-leveling, which is easy to level the platform.
* Before leveling, please ensure that the platform and nozzle are clean
and free of foreign matters to avoid affecting the leveling effect.
1. Select the correct voltage mode according to your local voltage ratings
(~110V or ~220V) before plugging in. The red switch is inside the
power supply casing and 220V is a default setting. A hex key can be
used to move the switch. Finally, double check the wirings, plug in the
power cord, and power on the printer.
In some cases, 220V labeled as "230" , 110V labeled as
“115"
