background image

Important Safety Instructions

Personal Safety During Assembly

Before beginning any fitness program, you should obtain a 
complete physical examination from your physician. When using 
exercise equipment, basic precautions should always be taken, 
including the following:

Instructions

Tools Required

Punch Wrench

Rubber Mallet 

Hex Key Wrench Set

Wrench

Before beginning assembly please take the time to read 
instructions thoroughly. Please use the various lists in this 
manual to make sure that all parts have been included in your 
carton. When ordering, use part number and description from 
the lists. Use only our replacement part when servicing. Failure 
to do so will void your warranty and could result in personal 
injury.

The equipment is designed to provide the smoothest, most 
effective exercise motion possible. After assembly, you should 
check all functions to ensure correct operation. If you experience 
problems, first recheck the assembly instructions to locate any 
possible errors made during assembly. If you are unable to 
correct the problem, call your authorized dealer. Be sure to have 
your serial number and this manual when calling. When all parts 
have been accounted for, continue on.

Read all instructions before using the equipment. These instructions are 
written to ensure your safety and to protect the unit.
Do not allow children on or near the equipment.
Use the equipment only for its intended purpose as described in this 
guide. Do not use accessory attachments that are not recommended 
by the manufacturer: such attachments might cause injuries.
Wear proper exercise clothing and shoes for your workout---no loose 
clothing.
Be careful when getting on or off the equipment.
Do not overexert yourself or work to exhaustion.
If you feel any pain or abnormal symptoms, stop your workout 
immediately and consult your physician.
Never operate the unit when it has been dropped or damaged.
Never drop or insert anything into any opening in the equipment.
Always check the unit and its cables before each use. Make sure that all 
fasteners and cables are secure and in good working condition.
Frayed or worn cables can be dangerous and may cause injury. 
Periodically check these cables for any indication of wear.
Keep hands, limbs, loose clothing and long hair well out of the way of 
moving parts.
Do not attempt to lift more weight than you can control safely.
Do not use the equipment outdoors.

Read each step in the assembly instructions and follow the steps 
in sequence. Do not skip ahead. If you skip ahead, you may learn 
later that you have to disassemble components and that you may 
have damaged the equipment.
Assemble and operate the equipment on a solid, level surface. 
Locate the unit a few feet from walls or furniture to provide easy 
access. The equipment is designed for your enjoyment. By 
following these precautions and using common sense, you will 
have many safe and pleasurable hours of healthful exercise with 
the equipment.

03

04

Summary of Contents for PS04













Reviews: