13 |
ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710)
ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710)
| 14
When [Peak mark] appears, peak mode is activated. The display always shows
the maximum value of load which has been applied to the load cell. When the
load is removed, the display still shows the peak load. When [Peak mark]
disappears, peak mode is deactivated. The value shown on display changes
according to the load applied to the load cell. Long press the
【
HOLD
】
can
change the indicator from Peak mode to Normal Weighing mode, or vice versa.
When Peak mode is on, [Peak mark] appears. Remove the load and short press
the
【
HOLD
】
button. The peak mode value is removed and indicator will
Cumulate Mode is a special function added under the normal weighing mode. In
this mode, the indicator saves weight readings into memory and previews the
accumulated weight value for all saved weight readings. Both real-time feedback
Only and during in the normal weighing mode and if the indicator reading is
more than zero or when the weight has been tared, short press to record the
The recently saved weight readings will be displayed in the screen after one
second. The sign appears in the lower left corner of the screen. This means
II. How to view the cumulative value?
the middle of the screen. Indicator shows as follows:
peak mode, or vice versa.
III. Gross / Net Mode
vice versa.
Display shows total gross weight value - [Gross Weight mark] is on.
Display shows total net weight value - [Gross Weight mark] is off.
IV. Clear Cumulative Value
value
will be cleared.
7.5 Calibration Mode
to Section 10 for the Calibration of the scale system
)
Long press the and it shows the cumulative value. The sign appears in
Long press , indicator changes from Cumulate to Normal weighing mode or
Press
【
TARE
】
, the indicator changes from Gross mode to Net mode, or
Long press
【
ZERO
】
, the total gross weight value and total net weight
In this mode, you have to enter the menu and parameter settings module. (
Refer
II. Remove Peak Mode Value
start another Peak mode operation.
7.4 Cumulate Mode
weighing data can also check the cumulative weighing value.
I. How to cumulate weighing values?
current weight data. Indicator shows as follows:
that weight data are recorded and be accumulated.
®
®
