background image

TABLE OF CONTENTS

1.     
2.     Safety Recommendations
3.     Display Icon List
4.     Keys
         4.1  Key List
         4.2  Key Instructions for all weighing modes
5.     Work Modes
         5.1  Overview
         5.2  Operation Mode Switching Diagram
6.     Start Up and Adjust
         6.1  Battery Installation
         6.2  Indicator Dimensions
         6.3  Connection Diagrams
                 6.3.1  805HP Wired Model
                 6.3.2  805HP Wireless Model
7.     Weighing Modes
         7.1  Normal Weighing Mode
                 7.1.1  Basic Operations in Normal Weighing Mode
         7.2  Gross / Net Mode
         7.3  Peak Mode
         7.4  Cumulate Mode
         7.5  Calibration Mode
8.     Configurations and Menu Operations
         8.1  Menu Operations
         8.2  Overload
         8.3  Modify Password
9.     Communication
         9.1  RS232 Communication
         9.2  Wireless Communication
10.   Calibration and Parameter Settings
         10.1  Standard Value Calibration
         10.2  Digit Calibration
11.   Troubleshooting Guides
12.   Technical Specifications
13.   Appendices
         13.1  Seven-segment digital display alphanumeric table
         13.2  Gravitational acceleration in different countries

Introductions and Features

2
2
3
4
4
5
6
6
6
7
7
7
9
9

10
10
11
11
12
12
13
14
15
15
20
21
22
22
23
25
25
28
30
30
33
33
33

®

®

1.   Introductions and Features

industry.

Key Features include:

                   

×

2.   Safety Recommendations

Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø

Exceptionally long battery life ( 3 AA batteries ) 

                      LED backlight and panoramic FSTN LCD view angle 
                      Material: ABS 
                      IP Rating: Ip65 
                      LCD 6-digit display with LED backlight 
                      Non-volatile memory for reliable data saving 
                      Units of Measurement: kg, g, t, lb, Klb, N, kN, oz, user-defined unit 
                      Configurable 21 set-points for precaution and warning 
                      User-selectable display interval 
                      Overloading recording 
                      10 user-selectable analog-to-digital converting frequency 
                      Weight calibration and digital calibration 
                      User-selectable auto power-off and power-saving timing 
                      Functions: Auto-Zero Tracking, Auto-Zero, Manual-Zero, Hold, 
                         Peak-Hold, TARE

installing, operating or configuring the indicator. 

mark:

Thank  you  for  choosing  Anyload  805HP  Handheld  Digital  Weight  Indicator.  The 
805HP  hand  held  digital  weight  indicator  is  a  general  purpose  and  durable 
indicator  that  provides  high  accuracy,  reliability  and  multiple  functions.  The 
805HP can drive up to eight 350

Ω

 or thirty two 1000

Ω

 load cells. With an IP65 

ABS wash down enclosure, the 805HP digital weighing indicator is ideal for use in
Transportation,  Entertainment,  Aerospace,  Military,  Food  and  Agricultural

This  manual  provides  installation,  operation  and  configuration  information  of 
805HP indicator. It is recommended to go through the manual in details before

Important instructions which involve safety are highlighted with the appropriate

 

 

ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710)

 

 | 2

1 | 

ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710)

 

 

Summary of Contents for 805HP





































Reviews: