3. GENERAL INFORMATION
__PAGE 24
3. GENERAL INFORMATION
3.1
B
ASIC BOAT DIMENSIONS AND SPECIFICATIONS
Your boat is manufactured to specific stability and flotation standards for the capacity
shown on the Builder’s Plate. Maximum recommended load includes the weight of all
persons aboard, all provisions and personal effects, cargo (if any) and all consumable
liquids (water, fuel, etc.). Any increase from the recommended load capacities will put
your boat in jeopardy of capsizing, swamping and/or sinking.
Furthermore, any changes to the masses aboard may significantly affect the stability, trim,
and performance of the boat. Stability can be considerably affected by loose fluids or
weight within the vessel. Keep the bilge area as dry as possible. In rough weather or at
planing speeds, keep all openings, hatches, lockers, doorways, and windows closed to
minimise flooding. Breaking waves are a serious stability hazard. Finally, stability can be
compromised when towing or lifting heavy weights using a davit or boom.
Note
: Minor deviations of the below data may occur, as the boats are hand-made
individuals.
3.1.1 Hull Size
Dimension
ISO
Symbol
Value/unit
Length of the hull
L
H
7.53 m
Length – max. overall
L
MAX
8.08 m
Beam of hull
B
H
2.23 m
Beam –
maximum
B
MAX
2.32 m
Maximum draft
T
MAX
0.96 m
Air draft: max
H
A
2.60 m
Summary of Contents for 750 SPD CLASSIC
