4. SYSTEMS AND COMPONENTS
__PAGE 44
NOTE
7
6
2
1
9
3
8
5
4
4. SYSTEMS AND COMPONENTS
This chapter is based on Anytec-listed standard and optional equipment. Any other equipment
or systems added (custom-made boats, aftermarket products and so on) are not covered
here. Furthermore, the outboard engine and engine control instrument details are not
included. The engine can be of multiple brands and models, in the choice of the dealer and
customer. Please check the manuals provided with that engine or consult the dealer who
installed it.
4.1
F
UEL SYSTEM
Your boat’s fuel system consists of a fuel tank, a fuel tank fill and vent fitting, an anti-
siphon valve, a sending unit, and an engine fuel supply line. Besides, there are two extra
fuel ports for optional pickups, if needed.
The factory-mounted boat fuel system (excluding engine) is designed to handle regular
gasoline as well as ethanol-blended gasoline with ethanol content not greater than 15%
(like E85). However,
the
engine may not be designed for ethanol-blended
gasoline
. Before introducing petrol with ethanol into the fuel tank, ask your dealer if
there is an addition of an engine or any components or replacement which is not
ethanol-compatible.
1. Fuel tank inspection hatch
6. Fuel fill hose
2. Fuel level
7. Fuel line
3. Fuel vent hoses
8. Fuel tank pressure test plate
4. Fuel vent
9. Fuel filter
5. Fuel fill cap, installed under hatch cover
Summary of Contents for 750 SPD CLASSIC
