Manual Anytec 868 CAB
2017 (REV A)
Anytec Sweden AB
Magasinsgatan 7
903 27 UMEÅ
0770-220 210
- 10 -
3.5 Tanks
Your boat has a 550 l fuel tank, but because of the shape of the tank there may be some
variation between the readings on the gauge and the actual fuel level. We suggest that you top
up with 68 l, 137 l och 275 l (half tank) and then up to full. Mark the tank at the appropriate
points at these levels. The boat must be level during testing.
O- regularly check tanks and their connections
3.6. Painting, Corrosion Protection
Your boat has been painted using the CTW International painting programme for aluminium
boats.
Basecoat:
Intergard 563
Colour
Adhesive for antifouling: Intergard 263
Base paint:
Interspeed BWO 992
Black
If any damage has occurred which allows you to see aluminium through the basecoat, a new
basecoat, adhesive and then antifouling must be applied. Contact your dealer if you require
assistance.
3.7 Windows
Make sure that your windows are clean, and watch out for cracks and other damage that may
impair visibility. The windows are bonded and made from toughened glass.
3.7.1 Electrical sunroof
On the roof of the cab is a electric sunroof hatch for light and to improve visibility on arriving
at harbor or navigation at low speeds. The hatch must be opened, adjusted or closed at speeds
below 10 knots. The hatch is operated from the dashboard.
3.8 Ladders and slipping protection
Keep surfaces clear of loose material, check the function and replace if damaged.
3.9 Furnishing and doors
The boat has a door in the front and a sliding door in the stern. Regularly check the function
of sealing and readability.
O- door should always be closed when driving.
https://www.boat-manuals.com/
