-ARWRH 2/6-
POWER
POWER
①
②
* This figure shows an ARW-04 as an example.
[Operation method]
SET button
As for the operation method of the ARW-03 and ARW-04, please refer to the other sections.
■
Writing
Set address values to be written in the ARW-04 or ARW-03 in advance.
Point the optical axis window of the ARW-RH to the address writing port of the target unit.
Press the SET button on the ARW-04 or ARW-03 to write an address value.
When writing is successful, a beep sounds.
When “ERR” is displayed, readjust the optical axis to press the SET button again.
■
Reading
Set the ARW-04 or ARW-03 to the reading mode in advance.
Point the optical axis window of the ARW-RH to the address writing port of the target unit.
Press the SET button on the ARW-04 or ARW-03 to write an address value.
When writing is successful, a beep sounds.
When “ERR” is displayed, readjust the optical axis to press the SET button again.
* This figure shows an ARW-04 as an example.
[Connection method]
Turn off the ARW-04 or ARW-03,
①
remove the cover on the RH connector part and
②
connect the connector of the ARW-RH.
To RH connector
ARW-RH