background image

19

6.  Once you start to edit a playlist, you will see below screen.

 

Source - files in storage. 

 

Playlist – files in playlist.

 

There are 4 icons which map to the keys of remote controller. Option 

key – launch slide bar

 

Play key – play media file. 

 

Info key – show media info. 

 

Ok key – select/unselect file.

 

 

6-1 In the slide bar, it helps you to do the following:

 

- select all : select all storage files.

 

- delete all : delete all playlist files.

 

- add/remove : update playlist from source.

 

- sort : sort playlist.

 

- save/abort : save or abort playlist.

 

- back : return.

7. 

If you choose “Sort” in the slide bar, you can change the order of files 

one by one.

8.  Press info key after you choose desired file, you will get the detail 

information.

9.  Press play key after you choose desired file, you will play the media file 

directly.

10.  If you make a playlist with all images files, before saving, the app will ask 

you if you want to hava background music while slideshow playing.

11.  Select “Settings” on home page, this page has three parts, “Repeat 

Mode”, “Slideshow Effect” and “Effect Duration”.

 

- Repeat Mode : play mode.

 

- Slideshow Effect : photo slideshow effect. 

 

- Effect Duration : photo effect duration.

Summary of Contents for 55V7050





























































Reviews: