-9-
Press the M button, and tap “Advanced” to set the network address within the IP locale.
Select “Use static IP” to configure the network settings and enter the IP address, gateway,
network mask, and DNS1 required for Wi-Fi network connection.
After configuration, press the M button, tap "Save" to exit to the the wi-fi settings interface
with saving.
Note: When you use dynamic IP addresses, you do not have select “Use static IP
addresses” to configure the network settings.
3. Tap the wireless network you want to connect to. If the connection status under the name
of wireless network shows “Connected”, the network connection is successfully. Then tap
“End” to finished the easyconfig.
