desktop, when the LCD is under locked mode, please press and pull the
icon to the green
point, then the LCD will unlocked automatically, see the figures below,
3.3
3.3
3.3
3.3 Power
Power
Power
Power Sav
Sav
Sav
Saving
ing
ing
ing Modes
Modes
Modes
Modes and
and
and
and lock
lock
lock
lock screen
screen
screen
screen
.
�
Press the “POWER” key shortly after starting up, system enter to power save and lock mode.
�
Press the “POWER” key or tap the touch screen, system will return to bright in 1 second
�
The primary operation of the device will not stop under the power save mode, just the LCD is
shut and with black screen. For example: playing music, movie, etc
�
Switch OFF: When the device is in the OFF mode, press and hold the “POWER” key for 3
seconds, the screen will display the power off interface, choose the power off item to confirm,
the system will shut automatically
【
Note
】
When the device with low battery it will alarm continuous and shut automatically without
charging. If the device can not start up please check if the battery is low, and try it again after the
battery is charged.
3.4
3.4
3.4
3.4 Battery
Battery
Battery
Battery management
management
management
management and
and
and
and charging
charging
charging
charging....
3.4.1 Charge the battery for 6-8 hours to make sure the battery is fully charged when firstly use.
3.4.2 Insert the micro port of the battery adaptor into DC slot on the device, and connect the other
side with the power socket. Then the desktop icon of the battery keep rolling which shows it is
charging, please wait until the battery is fully charged, don’t disconnect the power when charging.
Once the battery is fully charged, the Icon on the desktop will stop rolling.
【
Note
】
In order to keep the battery working in the best condition, please pay attention as below:
�
Please don’t charge the power in high temperature.
�
No need to release the power for this Li- battery, you can charge the power even there is still
some power in the battery, no need to wait it runs out.
All manuals and user guides at all-guides.com
