(4). Under the YPbPb message source, press the MENU button after popping the main menu, then press 8202 number
keys to enter the factory menu, select ADC ADJUST item, press the OK key to enter the next level menu, move the cursor
to the MODE item, press the left/right Moving key mover cursor to select YPbPr(SD)item, change the
R-GAIN/G-GAIN/B-GAIN value and R-OFFSET/G-OFFSET/B-OFFSET value of the machine after the upgrade to the
value before the upgrade.
( 5) .
In the ADC ADJUST item, press OK key to enter the next level menu, move the cursor to the MODE item, press the
left/right keys tomove cursor select the YPbPr(HD)item, change the R-GAIN/G-GAIN/B-GAIN value and
R-OFFSET/G-OFFSET/B-OFFSET value of the machine after the upgrade to the value before the upgrade.
(6). Complete the ADC ADJUST debugging, press MENU key succession to exit the factory built-in menu to save the
adjusted data, and then restore the original packaging.
Change
the
R-GAIN/G-GAIN/B-GAIN value and
R-OFFSET/G-OFFSET/B-OFFSET
value to the value before the upgrade
under the YPbPr(SD/HD) mode
Change
the
R-GAIN/G-GAIN/B-GAIN value and
R-OFFSET/G-OFFSET/B-OFFSET
value to the value before the upgrade
under the YPbPr(SD/HD) mode
Summary of Contents for LE32W354F
Page 20: ......
