- 42 -
Note: The word "Connected" displayed under the network name indicates a successful
connection.
Afterwards you can surf the Internet, connect to email services, etc.
Note 1: When you connect Wi-Fi for the first time and the prompt “Failed” appears, disconnect
Wi-Fi and reconnect it. When you input an incorrect password and the prompt “Authentication
problem” appears, touch the network and touch “Forget”, then connect with correct password.
Note 2: You do not have to re-enter the password when you re-connect to the previously
connected wireless network that is encrypted, unless you reset the product to the factory settings.
Note 3: Auto search for Wi-Fi is performed, i.e., no additional steps are required to connect to the
Wi-Fi network. For some closed wireless networks, the username or password may be required.
Note 4: The availability of Wi-Fi signals may depend on the distance, infrastructure, and objects
through which a signal must pass.
Scan
Touch the menu icon ( ) and “Scan” icon at the top right corner of screen to search for the
available wireless networks in the vicinity.
Advanced settings
Network notification
Select to notify you when an open network is available.
Keep Wi-Fi on during
sleep
Choose under which condition (Always, Only when
plugged in or Never) to keep Wi-Fi on when tablet is in
standby mode.
MAC address
Shows the tablet’s Wi-Fi MAC address.
IP address
Shows the tablet’s IP address.
Checking status of wireless network
You can check the status of the currently connected Wi-Fi through the following methods:
·
Status bar
After the product is connected to the wireless network, the status bar shows the Wi-Fi icon “
”
and signal strength (the number of the bars lighting up).
·
Wi-Fi network
In the network connection interface, touch “Wi-Fi
settings” and touch the currently connected wireless
network to show the information, such as name, status,
