Aode Machinery Co., Ltd Page 19 of 26
奥德机械有限公司
2012
7.3
温
控
器
的
使
用
与
设
定
Using & Setting of Temperature Controller
一、
WEST P6100
型
(Model WEST P6100)
：
阶层键：设定內部参数。
Level Key: Set interior parameter.
2
．
模能键：設定內部参数转换。
Condition Key: Set transformation of interior parameter.
3
．
减少键：用于减少值。如欲降低温度，控此键设定值会下降；如连续按住不放，下降速度
会加快。
Down Key: Decrease values. Press it to decrease temperature; press and hold to speed
up the decrease.
4
．
增加键：用于增加值。如欲提高温度，控此键设定值会上升；如连续按住不放，上升速度
会加快。
Up Key: Increase values. Press it to increase temperature; press and hold to speed up
the increase.
5
．
SP
：设定温度显示。
Display the setting temperature value.
6
．
PV
：实际温度显示。
Display the practical temperature value.
7
．
状况讯号指示灯。
Indicator light of condition and signal.
8
．
加热冷却讯号指示灯。
Indicator light of heating and cooling signal.
注：
客户设定温度只需按
增加
和
减少
键，其他按键请勿动。
Note: Just press and to set the temperature. Do not press other keys.
附加：当采用双仪表来进行远程设置时，需对现场仪表进行如下操作
Addition: When using double instruments for remote setting, the following operation is needed
for local instrument.
1.
按
2
号模能键，进入设置画面
Press condition key NO.2, then enter setting screen.
2.
按
2
号模能键翻滚
Rolling when press condition key NO.2.
3.
当选择
PV
区显示显示
-LSP
时，仪表设定值由本仪表控制
When choose PV to display LSP, setting value is controlled by instrument.
4.
当选择
PV
区显示显示
-RSP
时，仪表设定值由远程仪表控制
When choose PV to display RSP, setting value is controlled by remote instrument.
5.
选择好后按
1
键确认
After choosing, press 1 key to confirm.
Summary of Contents for AWM-05
