Outdoor temperature alert and frost warning
Keep pressing the
button to turn on/off the temperature alert and frost warning.
• press once: the temperature alert
is activate
• press again: the frost warning
is activate
• press again: temperature alert and frost warning are both activated
• press again: temperature alert and frost warning are both deactivated
Temperature alert
-
Press and hold the
button to set temperature alert values,
symbol and
temperature will flash. Use
+
and
button to select upper limit, press
MODE
button to confirm. The
symbol and temperature will flash at the same time. Use
+
and
button to select lower limit, press
MODE
button to confirm.
• Temperature alert setting range is from +50°C to - 20°C
• Alert symbol and temperature value will both flash with beep sounds if the current channel is in the
channel which has been set.
• Only Alert symbol will flash with beep sounds if the current channel is not the channel which has been set.
Frost warning
- If the wireless sensor measures a temperature between
+1
°C
and -3
°C, there is a risk of
frost and a snowflake symbol
will flash with beep sounds when it’s ON. If the temperature falls below
-
3
°C for an extended period of time, the snowflake symbol will be constantly displayed.
Note: Even if the frost warning is not displayed, when the temperature is around freezing point,
there is generally always a risk of frost and/or black ice. The outdoor sensor can only measure the
local temperature in the place where it is installed.
Information:
Only applies if more than one wireless sensor is in use: For the frost warning, the wireless
sensor with the lowest sensor number is always analysed.
Comfort for indoor humidity
3 levels of comfort will show:
DRY
COMFORT
WET
Temperature range
0°C ~ 50°C
20°C to 28°C
0°C ~ 50°C
Humidity range
< 40%
40% ~ 70%
>70%
Weather forecast
