Restarting radio signal reception
Manually restart the radio signal reception by pressing and holding the
+
and
buttons together for 2
seconds.
Turn off Radio signal permanently
Manually turn off the radio signal reception permanently by pressing and holding the
MODE
and
+
buttons together for 2 seconds, the symbol will be constantly displayed.
Setting the time and date manually
1. Press and hold the
MODE
on until the display for the hour format (24-hour or 12-hour) begins to flash.
2. Set the hour format with the
+
and
buttons. (in the 12-hour format, the afternoon hours are shown
with “PM” on the display)
3. Press
MODE
to store the setting.
4. Continue as described:
- Set a value with
+
and
.
- Store a setting with
MODE
.
5. Set the following settings one after another:
- Temperature unit (°F or °C)
- Air pressure unit (inHg or hPa )
- Time zone
- DST (ON or OFF)
- Hours
- Minutes
- Year
- Month
- Day
- Language (only refers to how the days of the week are displayed)
6. Then press
MODE
to store the changed setting.
Choosing the location
ATTENTION
- Protect the base unit and wireless sensor from dust, shocks, extreme temperatures and direct sunlight.
- Protect the base unit from moisture. Only place the base unit in a dry, enclosed space.
- The wireless sensor is protected against moisture but must be protected against water, e.g. rain.
