12. Case Open Connector
10. JP28 Keyboard/Mouse Wakeup Jumper
The “CASE OPEN” header provides chassis intrusion-monitoring function. To make this
function works, you have to enable it in the system BIOS, connect this header to a sensor
somewhere on the chassis. So, whenever the sensor is triggered by lights or by the opening of
the chassis, the system will beep to inform you. Please be informed that this useful function
only applies to advanced chassis, you may purchase an extra sensor, attach it on your chassis,
and make a good use of this function.
This motherboard provides keyboard / mouse wake-up function. You can use JP28 to
enable or disable this function, which could resume your system from suspend mode with
keyboard or mouse installed. The factory default setting is set to “Disable”(1-2), and you
may enable this function by setting the jumper to 2-3.
Pin 1
Sensor
GND
1
1
1
JP28
KB/Mouse Wake-up
Pin 1
Enable
Disable
(Default)
13. Support 10/100 Mbps LAN Onboard
On the strength of Realtek 8101L LAN controller on board, which is a highly-integrated
Platform LAN Connect device, it provides 10/100M bps Ethernet for office and home use, the
Ethernet RJ45 connector is located on top of USB connectors. The orange LED indicates the
link mode, it lights when linking to network. The green LED indicates the transfer mode, and it
lights when data is transferring. To enable or disable this function, you may simply adjust it
through BIOS.
The IrDA connector can be configured to support wireless infrared module, with this module
and application software such as Laplink or Windows 95 Direct Cable Connection, the user
can transfer files to or from laptops, notebooks, PDA devices and printers. This connector
supports HPSIR (115.2Kbps, 2 meters) and ASK-IR (56Kbps).
Install the infrared module onto the
IrDA
connector and enable the infrared function from
BIOS Setup, UART Mode, make sure to have the correct orientation when you plug in the
IrDA connector.
11. IrDA Connector
Green/Transfer
Orange/Link
Pin 1
1
KEY
GND
IR_RX
NC
+5V
IR_TX
IrDA Connector
