26
UPC-E
Read: Format
System Character “0”
Data digits (6 digits)
Check digits
Check digit verification: The check digit is optional and made as the sum of the numerical value of the
data digits.
Check digit trans.: By setting Enable, check digit will be transmitted.
Code ID setting: Refer to Code ID setting of UPC-A.
Insertion group selection: Refer to Insertion group selection of UPC-A.
Supplement digits:
Format
System Character “0”
Data digits (6 digits)
Check digit
Supplement digits 2 or 5
Truncation/Expansion:
Truncate leading zeros Refer to Truncation/Expansion of UPC-A.
Expand to EAN13 It extends to 13-digits with “0” digits when the feature is set to be enabled.
Example: Barcode “0123654”,
Output: “0012360000057”.
Expand to UPCA It extends to 12-digits when the feature is set to be enabled.
Truncate system character The
System Character
digits “0” of UPC-E data characters can be truncated
when the feature is enabled.
Add country code The country code (“0” for USA) can be added when the feature is enabled.
