Troubleshooting
Fault type
Test site
Remedy
Non-function
vehicle
1.
Is the battery terminal connector off?
2. Is the fuse intact?
3. Is the connection wire of battery and motor
damaged?
1.
Yes: connect the terminal plug; No: next.
2.
Yes : next; No: change the fuse.
3.
Yes: change the wire
Only move
forward but not
ba ckward
1.
Check if the detection switch is connected well;
2. Check if the wire between the battery to the
detection switch is connected well.
Move slowly
1.
Check if the battery voltage is normal(more than
6V);
2. Disconnect the motor plug, connect to the battery
directly, see if run faster;
2. Remove the gear box, check if the gear run good.
Front light not
shinning
1.
Check if the light bulb is good;
2. Check if the switch is good;
3. Check if the wire between light bulb and PCB
is disconnected.
The car can run,
but no light
1. Check if the connection wire and plug of battery
and car head is good.
No: connect the wire and the plug.
No sound
1.
Check if the loudspeaker is good;
2. Check if the switch is good;
3. Check if the wire between loudspeaker and
PCB is disconnected.
The car can't
move, the
light is ok
1.
Check if the foot switch connection is well.
2. Check if the motor terminal leads are off.
3. Disengage the motor connector, connect it to
the battery ends directly, see if the motor run.
1.
Yes: next; No: repair the foot switch.
2.
Yes: connect the terminal leads; No:
next.
3. Yes: drive line failure, deliver to the
professional service for repairing; No:
change the motor.
1. Yes: next; No: change the detection
switch;
2. No: connect it.
1. Yes: next; No: charge the vehicle;
2. Yes: drive line failure, deliver to the
professional service for repairing; No: next;
3. Yes: change tho motor; No: change the
gear box.
1. Yes: next; No: change the light bulb;
2. Yes: next; No: change the switch;
3. Yes: connect it.
1.
Yes: next; No: change the loudspeaker;
2.
Yes: next; No: change the switch;
3. Yes: connect it.
Can't be
charged
1. Check if the output of the charger is 6.8V-
7.2V.
2. Connect the input and output of the charger,
connect both side of the battery, check if it is
about 6.8V.
3. Check if the charger fastening is tight, jointing
is off.
1.
Yes: next; No: change the charger;
2.
Yes: change the battery; No: check if
there's any damage to the charge diode;
deliver to the professional service;
3.
Yes: tight the screw; joint the jointing
back.
Warning!
For your baby
,
s safe driving, Please follow warning:
1. The vehicle should be assembled by adult, and confirm assembling finished and safety before
use.
2. In order to avoid injury, please keep the small parts away from children under 1.5 years.
3.
Child should
drive
under
adult's
supervision, and the
supervisor
should keep stay when
driving.
4.
Charger should be done by adult. Please charge the vehicle before first use.
5.
To
avoid
harm to child, please
keep the
plastic
bags
and
other
package
materials
away from
the child.
Non-transport, should be used in the guardian's care.
Before use, do the safety education!
Summary of Contents for 370-109V80
Page 9: ......
