background image

9

Safety use

- Do not use in the street, on the road or near slopes and ditches. 
- Do not change the wire or add electrical devices to the car. 
- Use in a dry area, keeping away from wet conditions. Keep away from open flames. 
- Suitable for 1-2 children. Do not overload. 
- Maximum capacity is 40kg. 
- When not in use, switch off the power. If not in use for a long period, unplug the 

battery. 

- Check battery, charger and other parts regularly. If damages are found, ensure they 

are fixed before using. 

- Before the first use, charge for 8-12 hours. 
- Place the charger into the hole under the seat, then plug the charger into the socket. 
- The car cannot be used when charging. 
- Do not charge for more than 20 hours. 
- When charging, it is normal for the battery and charger to be warm. 
- Do not charge if the plug is wet to avoid electrical hazards or a short circuit. 
- Only use the charger provided by the manufacturer. Any other charger can damage 

the battery or cause a short circuit. 

- If not in use for a long period, ensure it gets charged once a month. 

Charging notification

 

Charging steps are as follows:

Step 1: The charging hole is under the seat. 
Step 2: Put the charger plug into the hole. 
Step 3: Connect the charger to a power socket. 

Warning: Car must be charged by an adult. This product cannot be used when 
charging. 

- The charger is not a toy and shouldn't be played with. 
- Maximum load: 40kg. Do not overload. 
- Suitable age: 3-6 years. 

Summary of Contents for 370-218V80






















Reviews: