(1) Auto Identity
When smart identification is enabled, when the system detects that a signal
source is connected, it will automatically switch to that channel.
(2) Energy saving
Turn on the energy saving, enter the backlight state of the screen and turn off the
light; touch the screen or wake up the screen’s backlight by pressing the button or
the remote control energy saving button.
(3) Temperature Monitor
Turn on the temperature monitoring. When the temperature of the device reaches
85 degrees Celsius, the shutdown countdown will prompt up. If there is no opera-
tion, the countdown will be shut down directly.
(4) Ambient Light Sensor
Turn on the light sensing mode to automatically adjust the brightness of the
screen backlight, according to the brightness change of the environment. (It needs
to be matched with a small photosensitive plate)
(5) Eye protection
Turn on the eye protection mode, when the user is in the operating system, the
screen backlight will be darkened, and the backlight will restore the backlight
brightness after 3S operation, thus protecting the user's eyes.
(6) Intelligent Return
Turn on smart return, when the current channel of the switch has no input signal,
it will return to the previous channel.
(7) NoSignal Standby
Turn on no standby signal, and the system will enter the standby state after 10
minutes without any operation in the no signal channel.
(8) Child lock
Child lock password: Set the screen lock password, the initial password is 2580;
Release the lock by entering 2580 by default setting.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
