10
OPERATING GUIDELINES
F. SOLDERING IRON
1. Connect the Soldering Iron connection assembly to the receptacle
located at the front of the control panel (“B3” from the CONTROL
PANEL GUIDE).
2. Follow the initial procedures (“A. INITIAL PROCEDURES”).
3. To activate the “SOLDER IRON” function, turn the solder iron set
temperature knob B2 clockwise until a click is heard.
3. Adjust the soldering iron temperature using the soldering iron
temperature adjustment knob (“B2” from the control panel).
4. Start using the soldering iron when desired temperature is reached.
5. Deactivate the SOLDER IRON after usage. To deactivate turn the
solder iron set temperature knob B2 counterclockwise until a click is
heard. During this time, the display for soldering iron temperature
will alternate from “Off” to actual temperature display. Once the
temperature drops to approximately 90°C the system will display
“OFF” on the panel. It is now safe to switch off the main power
switch.
G. System Settings
The device has a system settings menu which can be access by
following the procedures below:
1. Turn off unit.
2. Adjust all knobs to the minimum position or in the case of soldering
iron and hot air gun set temperature knob to the OFF position.
3. Power up unit by switching the power switch to ON.
4. While the “AOYUE” name is scrolling simultaneously turn the
soldering iron and hot air gun set temperature knob to ON position.
5. If successful the display would show “Set 000” indicating that the
system settings menu has be accessed.
6. Adjust selection menu with the air flow adjustment knob “A1”.
7. Selection menu is adjustable from 0 to 7. To enter the selected
function, turn the hot air gun knob to off position .
