11
OPERATING GUIDELINES
H. Activating Soldering Iron Auto-Sleep Mode
The soldering iron’s SLEEP mode can be activated by following the
set of procedures below:
1. Follow System Setting procedures 1 to 6.
2. Adjust system selection menu to Set 001, then turn the hot air
gun knob to off position .
3. If successful the display “B1” would show “###t” indicating
soldering iron sleep timer setting is being set.
4. Adjust the sleep timer with the air flow adjustment knob “A1”,
Sleep timer is adjustable from 1 to 60 minutes with “OFFt”
signifying sleep timer is turned off.
5. Save the selected timer settings and exit from the sleep timer
adjustment menu by pressing the turn the soldering iron knob to
off position .
6. If the sleep mode is activated the sleep timer will start counting
down once the soldering iron is activated.
7. When the sleep timer expires system will start cooling down the
soldering iron while the display shows a flashing OFF to signify
soldering iron is currently preparing to go into sleep mode. Once
soldering iron actual temperature goes below 90 degrees, the
display “B1” would show “ - - - - “ four dashes indicating
soldering iron is now in sleep mode.
Selection Menu
Function
0
None
1
Soldering Iron Sleep Timer
2
Hot Air Gun Sleep Timer
3
Temperature Scale Adjustment
5
Soldering Iron Digital Offset
6
Hot Air Gun Digital Offset
7
AC Line Frequency Selection
